Maker Faire Yearbook 2023

Projects

Found 2955 Results

Older posts

Page 47 of 124

Newer posts

FIRST Robotics Competition: Team 2783 Engineers of Tomorrow

Faire: Louisville

Maker: Engineers of Tomorrow

Home: United States

The Engineers of Tomorrow (Team 2783) is a team of high schoolers based in Oldham County, KY that competed annually in the FIRST Robotics Competition.

A Talk on Stark Drones: Changing the Way the World Communicates

Faire: Bay Area

Maker: Andrew Kamal

Home: Michigan, United States

Stark Drones is an emerging startup with an intellectually diverse team of talent aiming to tackle some of the world's toughest problems. One of those problems involves the sustainability and environmental friendliness of cubesat and satellite deployment. Andrew believes modern day Aerostats and giant balloons can be the future of sustainable, cost-effective, low earth orbit deployments. Stark Drones is becoming a minor player in the Internet Balloon space and working on really disrupting the industry.

Light Painting Stick

Faire: Los Angeles

Maker: Richard Truong

Home: California, United States

Light painting is a photographic technique in which exposures are made by moving a light source while taking a long exposure photograph. The Light Painting Stick uses an array of densely packed RGB LEDs to produce vibrant and realistic images.

Smart Garden using Seeed Studio WIO Terminal

Faire: Lisbon

Maker: Seeed Studio

Home: Cataluña, Espanha

It is a workshop sponsored by Seeed Studio for the educational community, and delivered by POWAR, in which we will show teachers the capabilities of the WIO Terminal, an IoT device designed by Seeed Studio, to carry out projects related to environmental sciences and the internet of things. The WIO terminal has a light sensor, accelerometer, microphone, buzzer and screen integrated into the device, in addition to the possibility of connecting to WiFi and LoRa network. On top of that, Seeed Studio's WIO terminal works with sensors and actuators that don't need complicated connections or advanced electronics skills, making them perfect for learning as you just need to plug them in and load the code to start using them. In the workshop we will first teach teachers how to use and program some of these sensors, and then we will teach them to integrate them to create an intelligent plant monitoring system that can give us information such as ambient temperature, amount of light, relative humidity and soil moisture, and also warn us when the plant needs to be watered. We will also have some other sensors of different types for teachers to try during the workshop if they want.

Bracelet Maker — Robotics Toy Made With Girls In Mind

Faire: Rome

Maker: Haptic Synaptic

Bracelet Maker is a robotics toy with the aim of enhancing girls’ interest in coding and engineering through playing with friends. The toy’s unique patented knitting system is easy-to-use and suitable for children aged 8 and above, who can both gain new skills and engage their friends by using it. The design stimulates long-term use and learning through variation and repetition. In mastering the basics of mechanics and coding through playing, girls are given a foundation for an ongoing interest in STEM, ideally resulting in increased women’s participation in tech.

Urban Workshop

Faire: Orange County

Maker: Urban Workshop

Home: California, United States

Urban Workshop is one of the largest and most successful DIY workshop and makerspace in North America at helping our members achieve success in their projects, new business start ups, and learning goals.

Louisiana Lagniappe Chapter of EGA

Faire: Baton Rouge

Maker: Louisiana Lagnaippe Chapter of EGA

Home: Louisiana, United States

Louisiana Lagniappe Chapter of EGA is a community of stitchers in the greater Baton Rouge area. Our members have a wide variety of interest and skill levels in needlework. More information is at www.Lalag-ega.org

DIYcave Makerspace

Faire: Central Oregon

Maker: DIYcave Makerspace

Home: Oregon, United States

DIYcave is a community of people just like you. We are: artists, makers, hackers, entrepreneurs and craft enthusiasts with various interests and skills. Come see a representation of our shop and the things our community members create.

Robotics – Rolling Droid Designs

Faire: Syracuse

Maker: JAMES VANDUSEN

Home: New York, United States

Review complete end to end creation of a BB8 unit from Star Wars using AutoDesk Fusion 360 - from concept, design to electronics and manufacturing using tools for hobbyists.

EUREKA! : “Datemi un filo immerso in un liquido, dall’alto verso il basso, e vi indicherò il livello”

Faire: Rome

Maker: Giuseppe Fiordaliso

The peculiarity of this project is that it allows the measurement of the water level in all those sectors where industrial-type measuring devices are unacceptable both for the costs and for the skills required for implementation. This level measuring device uses a common insulated conductor immersed in water as a measurement probe. It consists of two parts: measuring probe with measuring electronics and microprocessor control unit. The two parts are connected via a non-polarized two-wire connection in order to simplify installation operations. The probe, of the capacitive type, consists of a simple insulated conductor wire, and can be made at a low cost and can be easily adapted by the user to his needs. The measuring range of the device goes from a few tens of centimeters to several meters without requiring particular additional components or specific components for the type of application. The measuring unit based on a microcontroller receives a digital current signal from the measuring probe and according to the settings made in the "user calibration" phase for the "empty" level and the "full" level, displays the value on a display of the level measurement in the range 0...100 %. The microprocessor also controls an output relay in correspondence with two level thresholds (low level setpoint and high level setpoint) freely settable by the user in the range 0…100% through a simple programming procedure. In the programming phase it is possible to choose whether the energized relay state must correspond to a level below the low level threshold or to a level above the high level threshold. In this way it is possible to operate an external device, always in safe conditions. The measurement has an accuracy better than 6% and is characterized by high reliability because there are no metal parts in contact with water or moving parts.

Ghostbusters fvg

Faire: Trieste

Maker: Ghostbusters fvg

Home: Fvg, Italy

Direttamente dal mondo ectoplasmatico pronti per stupirvi e render felici bambini e non..siamo pronti a credere in voi!

Labirinti Scacchistici

Faire: Trieste

Maker: ASD LABORATORIO SCACCHI

Home: Friuli Venezia Giulia, Italy

Enigmi, solitari e labirinti scacchistici

FPV IoT Micro Tanks

Faire: Rome

Maker: Oleksandr Poliakov

Many of us still remember how, as children, we spent hours in front of the TV, playing the legendary Battle City. And what would happen if the game was being developed these days? Of course we would want to play it over the Internet and perhaps with AR glasses. But what if we went even further and brought it into the real world? Where we could drive around in a handmade arena, or in a hallway. We can fire an infrared cannon at the enemy, or at his base. Or just chase pets? And since these are IoT tanks - we can control them from the browser. Or even write javascript code to control them!

PADEL SMASH FUTURE powered by Padel Trend Expo

Faire: Rome

Maker: Padel Trend srl

PADEL SMASH FUTURE powered by Padel Trend Expo

ReCreate A Robot

Faire: Rocklin

Maker: ReCreate

Home: California, United States

Join nonprofit ReCreate to repurpose interesting everyday materials into an artistic Robot. Rather than recycling, which breaks down materials into their component parts, upcycling (recreating) gives new life to an item by repurposing it in a creative way. Create your one of a one-of-a-kind robot with materials sourced from regional businesses and individuals in this fun and eco-friendly activity. You may never look at an empty cardboard box the same!

CRASH Space

Faire: Orange County

Maker: CRASH Space

Home: California, United States

Come see some of the many and varied projects that CRASH members have been working on, and meet our mascot, Sparkles the soldering unicorn.

Intelligenza artificiale come supporto alla diagnosi di epatocarcinoma

Faire: Rome

Maker: Sapienza Università di Roma

Hepatocellular carcinoma (HCC) is the most common primary liver cancer worldwide. Early diagnosis is crucial to improve management and provide survival benefits to patients with HCC. We designed a Machine Learning (ML) and a Deep Learning (DL) for nuclei classification by using features extracted by immunofluorescence images. We demonstrated the ability of the proposed models to classify liver nuclei segmented by immunofluorescence images, thus suggesting a potential useful tool for pathologists in HCC diagnosis.

Raspberry Pi

Faire: Bay Area

Maker: Raspberry Pi

Home: Cambridgeshire, United Kingdom

Makers will be able to get hands-on with Raspberry Pi Ltd's newest computer, Raspberry Pi 5. Talk to the Raspberry Pi team and perhaps grab a little piece of Raspberry Pi swag.

Nuova Vita al Sottoprodotto Cartone e non solo

Faire: Rome

Maker: APEA REGIONALE CARTONECO RETE IMPRESA SOGGETTO

The CARTONECO "REGIONAL" APEA project aims to achieve symbiosis and sustainable industrial and technological development, in order to implement circular economy processes aimed at all the possible synergies that can be activated in several sectoral areas in order to guarantee the maximum effectiveness of the strategy of development of the APEA. Starting from FSC certified by-products such as cardboard, MDF and chipboard, new innovative products are created and manufactured, allowing the "residue" to be given a second life.

Repair Café

Faire: Aarhus

Maker: Repair Café Aarhus

Home: Denmark

We will repair and/or help people to repair their bikes, clothes and small electric appliances (toaster, lampe, blender...).

Girl Scouts of Virginia Skyline Council

Faire: Lynchburg

Maker: Katey Markiewicz

Home: Virginia, United States

The Girl Scouts of Virginia Skyline Council booth will provide information on who Girl Scouts are, what Girl Scouts do, and how to join Girl Scouts.

VILLAGE – Virtual Reality Game (VR)

Faire: Syracuse

Maker: Juan Denzer

Home: New York, United States

Virtual Information Literacy Live Augmented Game Experience (VILLAGE) is a project team made up of librarians and students at Syracuse University Libraries. Come try out the VR game with Meta Quest 2 and learn about game design.

Live Screenprinting with Paper City Clothing Co

Faire: Pioneer Valley

Maker: carlos pena

Home: Massachusetts, United States

Print your own garments and household items and learn about the screenprinting process from master printer Carlos Peña, owner of Paper City Clothing Company, a small business on a mission to expand opportunities for youth in Holyoke MA.

FAZ com as tuas mãos – molda polpa de papel reciclado com moldes impressos em 3d

Faire: Lisbon

Maker: Mariana Costa e Silva

Home: Leiria, Portugal

A revolução no fabrico de objetos está a acontecer, o design de produto está ao serviço do utilizador-fazedor: FAZ com as suas mãos! FAZ com as tuas mãos é um processo participativo de produção de mobiliário e brinquedos. Modelos fáceis de construir com ferramentas básicas, materiais fáceis de encontrar e aulas para ensinar a fazê-los em curtos períodos de tempo. Nesta Maker Faire proponho realizar um workshop de moldagem de polpa de papel tridimensional a partir de moldes impressos em 3D, com um aspirador, magia e papel reciclado.

Older posts

Page 47 of 124

Newer posts