Maker Faire Rome 2025

Piattaforma Robotica Elettrino32

Elettrino32 is a robotics prototyping board with superior performance to the current ElettrinoPlus. Elettrino32 is designed for enthusiasts of the famous Areduino board, as it is compatible with the related development environment. Like ElettrinoPlus, it is equipped with powerful motor drivers, but this time it can control 4 DC motors for 4WD applications on board. The motor drivers are integrated and produced by ST, capable of managing motors over 50V and with peak currents up to 5.6A. The control logic part is implemented with a 32-bit PIC32MX795F512L processor with 80 MHz clock, 512K Flash, 128K RAM and with 83GIPO (including those already used on board). As with the previous boards, the motors can be powered separately, which is why there are two switches on board, one for the logic and one for the power section. Onboard features include an I2C bus, a button, two general-purpose LEDs, a buzzer, and a selector switch for powering a bank of outputs directly from the batteries, useful for driving high-power servomotors. The board also includes a slot for mounting an OLED display and a WiFi dongle for IoT applications.

https://www.elettraroboticslab.it/