Maker Faire Yearbook 2024

Projects

Found 174 Results

Older posts

Page 2 of 8

Newer posts

Capteurs environnementaux

Faire: France

Maker: LabFab

Home: France

Bienvenue ! Cet atelier collectif a pour but de monter ensemble un capteur pour mesurer des données environnementales. Nous ferons un assemblage de composants électroniques et connecterons le capteur à une basse de données. Ensuite, nous monterons un boitier en bois prédécoupé dans un atelier FabLab. Faites-vous plaisir ! Et surtout ne pas hésiter à poser des questions. #data #santé #environnement #IoT

DIY Computer Controlled Drawing Machine

Faire: Milwaukee

Maker: Gabriel Stern

Home: Wisconsin, United States

A CNC drawing machine is a device that uses computer control to create drawings and designs on paper or other flat surfaces. Equipped with a pen or marker, it moves in smooth, programmed patterns to accurately bring digital designs to life.

SnappyXO Design

Faire: Long Island

Maker: Josh Prentice

Home: NY, United States

SnappyXO Design (www.snappyxo.com) is an affordable and modular educational robotics product that scales across K-12. It consists of the world's first mechanism synthesis software, MotionGen Pro, patented hardware and a standards-aligned curriculum.

Smugglers Run: Interstellar Escape, an Alternate Control Game

Faire: Tulsa

Maker: Ryan Pederson

Home: Oklahoma, United States

Smugglers Run: Interstellar Escape, is an Alternate Control Game that wants part of the gameplay to be in the controls themselves. Use a custom made controller to pilot your ship and immerse your body into this intergalactic adventure!

PROGETTISPICCI – Lettore cd audio per stereo autocostruito

Faire: Trieste

Maker: FabLab Belluno

Home: BL, Italy

Un vecchio CDRom per pc, un po' di legno per il case, due casse ed ecco che possiamo avere un lettore cd audio nuovo nuovo per ascoltare la nostra musica!

DIY Cloud Chamber: vieni a scoprire le particelle elementari con noi!

Faire: Trieste

Maker: ICTP Scientific Fablab (SciFabLab)

Home: Veneto, Italy

Vuoi vedere l'invisibile che ci circonda? Ti è mai capitato di vedere le particelle che ci attraversano in ogni momento? No? La nostra camera a nebbia ti permetterà di vedere con i tuoi occhi le particelle elementari di cui hai tanto sentito parlare dai fisici ma che nessuno è mai stato capace di mostrarti!! Uno strumento per rallentarle, uno strumento per fermarle e nel buio... rivelarle.

Bionic hand with AI controll

Faire: Tashkent

Maker: Sunatullo Ikramov

Home: Districts of republican subordination, Tajikistan

A Bionic Hand with AI Control is a robotic hand that copies human hand movements. It uses an Arduino to control the fingers, while AI helps it understand signals from muscles. This allows the hand to move naturally and do tasks like a real hand.

Smart space integration

Faire: Tashkent

Maker: Matluba Madaminova

Home: Namangan, Uzbekistan

The "Smart Space Integration" project includes 4 interconnected areas: "Smart Home", "Smart Parking", "Surveillance System", "Garden Assistant". The goal of this project is to create innovative solutions to enhance comfort and safety in urban area.

Midwest R2 Builders Club

Faire: Wayne County

Maker: Midwest R2 Builders Club

Home: Ohio, United States

I’m a member of the (main) R2 Builders Club. The local chapter, Midwest R2 Builders Club concentrate and promote STEM which includes droid building; but also 3D printing and CNC cutting and vacuum forming. From Mouse (MSE) Droids, BB8, R2-KT, Battle Droids and Pit Droids; we can help you build any Droid in the Star Wars universe

xrover, candy collector

Faire: Bay Area

Maker: techtreespace

Home: Gwangjin-gu, Korea, Republic of

Meet "xrover", a 3D-printed robot for coding education. Making and using "xrover" is super fun and satisfying for kids and teens! In our candy collection game, you can gather your favorite candies from a map within a limited time. Playing with friends or family will make it even more fun. You will also get to take "xrover" apart and put it back together. These activities will make you excited about coding and making things. We can’t wait to see you enjoy this awesome experience!

IT Girls

Faire: Sarajevo

Maker: Leila Hadzic

Home: Sarajevo, Bosnia and Herzegovina

IT Girls je zajednicka inicijativa UNDP, UNICEF i UN Women u BiH. IT Girls radi sa preko 110 škola širom BiH, pruža obuke nastavnicima i nastavnicama, donira Arduino opremu, omogućavajući pristup digitalnim vještinama djevojčicama i dječacima.

Father-Son Projects

Faire: Rochester

Maker: Johnathan Fountain

Home: New York, United States

Projects my father and I have made together over the years.

Saya Fan Art Bot

Faire: Coney Island

Maker: Sayaka Naito

Home: New Jersey, United States

Come see my robots and have fun controlling them! This year, I’ll be bringing my Gardener Robot and a brand-new robot that I’m currently working on. I’m not sure how far along it will be, but I’m excited to find out!

LILYGO T-Deck Plus

Faire: Bay Area

Maker: LILYGO

Home: Florida, United States

LILYGO T-Deck Plus integrates QWERT keyboard, ESP32-S3 master control + LORA and GPS, and is equipped with microphone and speaker, and a large-capacity 2000mAh battery to meet the battery life requirements. It is suitable for network control communication terminals. MCU:ESP32-S3FN16R8 Dual-core LX7 microprocessor Wireless Connectivity: 2.4 GHz Wi-Fi & Bluetooth 5 (LE) Development : Arduino, PlatformIO-IDE, Micropython Flash: 16MB PSRAM: 8MB Battery ADC PIN: 1004 Onboard functions: GPS, TF Card, Microphone, Speaker 2.8 inch ST7789 SPI Interface IPS LCD: Resolution: 320x240 Full viewing angle SX1262 LoRa Transceiver (Chip Optional): Transmit power: +22dBm Frequency Optional: 433/868/915Mhz

STEM Akademija Sarajevo

Faire: Sarajevo

Maker: STEM Akademija Sarajevo

Home: TK, Bosnia and Herzegovina

Program STEM akademije kreira buduće inovatore kroz nove, zanimiljive, interaktivne metode učenja. Djeca zajedno sa nama otkrivaju tajne svijeta programiranja, robotike i inženjeringa dok istražuju i razvijaju svoju kreativnost kroz dizajn I

Machine knitting – punchcards and Arduino hacks

Faire: Bay Area

Maker: Machine Knitters Guild of the San Francisco Bay Area

Home: California, United States

Learn how knitting machines work, and how they can be programmed - either electronically, or mechanically using punchcards - to make colorful patterns and elaborate lace and other textures. See an open source hack for vintage 1980's knitting machines, giving them new Arduino-powered electronic patterning.

Lobomat

Faire: Luxembourg

Maker: Andreas Ohrdorf

Home: lower saxony, Germany

The Lobomat is the answer to the most frequently asked question of all: "How do you get praise when you deserve it?" With simple technical means comes the solution: praise at the touch of a button.

Arduino-controlled Recorder Music!

Faire: Bay Area

Maker: Kevin Chow

Home: California, United States

An Arduino Uno controls MOSFETs that turn on air pumps to play recorders. Each recorder is pre-covered to play a specific note. The recorders their corresponding air pumps sit on 3D printed mounts to hold them in place.

Microchip Maker Space Update 2024

Faire: Bay Area

Maker: Bob Martin

Home: California, United States

Join the Wizard of Make, Microchip's Bob Martin for an update on the latest developments in the Arduino / Maker Space ecosystem. This technical presentation will cover the new AVR Dx family of microcontroller supported by Arduino including some new devices such as the AVR64DU32 which is the updated follow on to the popular 32U4 and 16U2 AVR microcontrooller with USB. Development tool updates, including Visual Studio Code plugin support and updates on the latest low cost dev kits will also be covered.

Coney Island Maker Faire and Elijah Horland present: The Worst Game Controllers, Ever.

Faire: Philadelphia

Maker: Elijah Horland

Home: New York, United States

Drop by for maker-mischeif fun, MythBuster's style. Can you levitate matter with sound? OK, so spoiler - YES, and it's a LOT of fun. Play with the worst video game controllers, ever designed - see if you can break a record, or just an egg or two!

Let's Play with Split Flaps Displays!

Faire: Bay Area

Maker: AfterAI Inc.

Home: Tokyo, Japan

Flap flap flap flap... Would you like to display your favorite message on a split-flap display, which used to be used in airports and train stations for announcements until a while ago? Taking a photo with your message will surely become a great memory at Maker Faire Bay Area. We have created a DIY split-flap display kit called AfterAI Flaps. Currently we are preparing to sell them online aiming its debut in fall 2024. Please check the web page for more information: https://afterai.dev/flaps

IDM NYU Table

Faire: Coney Island

Maker: IDM NYU

Home: New York, United States

Students from Integrated Design & Media program at NYU Tandon will be showcasing a variety of interactive media projects. These works explore the intersection of technology and art, encouraging hands-on interaction and engagement from the audience.

SnappyXO Design Workshops

Faire: Long Island

Maker: Anurag Purwar

Home: New York, United States

Dream, Design, and Invent with SnappyXO Robot kit at the Maker Faire LI. You will have an opportunity to design and build catapults and robots designed and prototyped in the Computer Aided Design and Innovation lab led by Dr. Anurag Purwar of SBU.

El arte y la tecnología – Raspberry Jam México

Faire: CDMX (Mexico City)

Maker: Enrique Agustín Reyes Gaitán

Home: CDMX, Mexico

Proyectos que incorporan manualidades artísticas en papel, circuitos electrónicos, microcontroladores y robótica, por medio de tarjetas de felicitación, un robot de origami, un cubo autobalanceante y los ojos de un humanoide animatrónico.

Older posts

Page 2 of 8

Newer posts

Maker Faire Yearbook 2024

Projects

Cookies: Here's The Actual Breakdown.